![]() The following parameters are avaible (default values in bold print): (Information on how to use GRF parameters: in TTDPatch in OpenTTD). GRF parameters can be used to customize various aspects of the Japanese Train Set. Stations: Load vehicles gradually: On - recommended.Vehicles: Enable wagon speed limits: On - recommended.Vehicles: Weight multiplier for freight trains: 5.Vehicles: Disable electric rails: Off - strongly recommended.It is often necessary to have long trains to handle the large quantities of Japanese passengers. Vehicles: Enable building very long trains: On - recommended.This will hopefully be fixed in a future version of OpenTTD. Note that this does not currently affect Shinkansen trains. Vehicles: Enable realistic acceleration for trains: On - recommended.Japanese trains and road vehicles drive on the left, so you should also make that selection when starting a new game. Construction: Show signals on the drive side: On - recommended to get the right types of signals.You should change the following settings under Advanced Settings on the title screen: Upgrading old savegames in this way might work, but a few glitches are to be expected. (OpenTTD will display a warning upon opening such savegames though). If you have an older version of the Japanese Train Set installed, removing the old file and adding the new one will make all your old savegames use the new version. Note that this will most likely make your existing trains unusable, since many wagons will be changed into locomotives and vice versa. If you wish to do so anyway, you can activate the Japanese Train Set under NewGRF Settings in the Options menu. It is not recommended to add the Japanese Train Set to an existing savegame (unless that savegame was using an older version of the Japanese Train Set already). To use the Japanese Train Set in a new game, you only have to add it under NewGRF Settings on the title screen. ![]() Alternatively, you can use OpenTTD's online content service, as described here. If you have downloaded the Japanese Train Set from the Japan Set homepage, simply copy the grf file into the "data" folder inside your OpenTTD folder. You will need OpenTTD 0.7.0 (or higher) for full features. Include in your ttdpatch.cfg file the lines: (x is for road vehicles and should be set to a value of 0 to 3.)Ĭurves 333x Installation and settings for Open TTDįor general information on how to use GRF files in OpenTTD, read the OpenTTD manual. To get full benefit from the different engines in the set, i.e. You should also enable the "realistic model" of train acceleration Japanese trains and road vehicles drive on the left, so you should also make that selection in the TTD menu.
0 Comments
Leave a Reply. |